SKU C11562
There are no reviews yet. Write a review
Availability: In Stock
Usually ships In 1-2 Business Days
  • Long-lasting
  • Can be easily cleaned to renew sharpening surface
  • 1,500 grit

Price: $4.00


    Replacement rods for CCD4 / 3-in-1 Sharpening System. See additional images for reference to the item that uses these rods. Two (2) rods per set @ $10.00 Ceramics are excellent for finishing and maintaining an already sharp edge. Removes very little metal.



    California’s Proposition 65 Warning:

    This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.


    Replacement Instructions:

    1. The sharpening capabilities of ceramic stones decreases with use because the metal dust collects on the working corners of the triangular stones. The ceramic stones can be removed and cleaned to refresh their abrasive quality or replaced.
    2. Remove the Phillips head screw(s) and save for re-assembly.
    3. Remove the plastic cover and save for re-assembly.
    4. Remove the old stones and dispose.
    5. Insert one of the ceramic stones into the deepest cavity available, then place the other stone into the opposite cavity. The second stone will rest partially on top of the first stone to form a "V" in the middle. Both stones are designed to be interchangeable.
    6. Replace the plastic cover.
    7. Replace the Phillips head screw(s).
    8. Cleaning Instructions:
    9. Remove the Phillips head screw(s) and save for re-assembly.
    10. Remove the plastic cover and save for re-assembly.
    11. Remove the triangular-shaped ceramic stones.
    12. Using a small, mild brush, scrub the surface and working corners of the ceramic stones with kitchen cleaning powder and water.
    13. Allow the surface of the stone to dry.
    14. Repeat for the other stone.
    15. Replace the stones, plastic cover, and Phillips screw(s).