SKU 207
There are no reviews yet. Write a review
Availability: In Stock
Usually ships In 1-2 Business Days
  • Long-lasting
  • Can be easily cleaned to renew sharpening surface
  • 800 grit

Quantity:
Price: $3.76

    Description

    The Triangular-shaped Fine Ceramic Stones are used for light honing of straight or serrated blades. Since very little metal is removed during use, they are excellent for finishing the edge after coarse sharpening or maintaining already sharp edges.

    Use for replacement stones on the following items:

    • Ceramic Edge Pro Electric Knife Sharpener (item # 50245)
    • Deluxe Diamond Electric Knfie Sharpener (item #50127)
    • Diamond Edge 2000 Electric Knife Sharpener (item #50138)
    • Diamond Edge Electric Knife Sharpener (item #50376)
    • Adjustable Angle Pull-Thru Knife Sharpener (item #50264) - SERRATED SLOT ONLY

    See additional images for item references.

    Videos

    Specifications

    California’s Proposition 65 Warning:

    This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

    Instructions

    Replacement Instructions:

    1. The sharpening capabilities of ceramic stones decreases with use because the metal dust collects on the working corners of the triangular stones. The ceramic stones can be removed and replaced or cleaned to refresh their abrasive quality.
    2. Remove the Phillips head screw(s) and save for re-assembly.
    3. Remove the plastic cover and save for re-assembly.
    4. Remove the old stones and dispose.
    5. Insert one of the ceramic stones into the deepest cavity available, then place the other stone into the opposite cavity. The second stone will rest partially on top of the first stone to form a V-in the middle. Both stones are designed to be interchangeable.
    6. Replace the plastic cover.
    7. Replace the Phillips head screw(s).
    8. Cleaning Instructions:
    9. Remove the Phillips head screw(s) and save for re-assembly.
    10. Remove the plastic cover and save for re-assembly.
    11. Remove the triangular-shaped ceramic stones.
    12. Using a small, mild brush, scrub the surface and working corners of the ceramic stones with kitchen cleaning powder and water.
    13. Allow the surface of the stone to dry.
    14. Repeat for the other stone.
    15. Replace the stones, plastic cover, and Phillips screw(s).