SKU PSFAWIP

There are no reviews yet. Write a review
Availability: In Stock
Usually ships In 1-2 Business Days

Manual Features:

  • Grit: Approximately 1,100 - 1,200 grit
  • Handle molded into the back of the stone bar
  • Sharpens and polishes the edge at the same time

Quantity:
Price: $9.50

    Description

    This Carbide Replacement Blade is for the Smith's Pruning Tool Sharpener (item# 50600) and the Smith's Mower Blade Sharpener (item# 50602). Tungsten Carbide Blades put a quick sharp edge on dull mower blades, hedge shears, pruning shears and loppers. These carbide blades are precision ground to provide a smoother, more consistent sharp cutting edge on your tool blade. They also sharpen your blade quicker than standard carbide blades. This is the replacement part for the right-side blade only (Item# C10014) and there is only one slot this blade will fit into. Note: the left side is not a sharpening blade so this item will not fit into that slot. This blade is replaceable only. See additional images for reference to the item(s) that uses this particular carbide blade.

    Videos

    Specifications

    California’s Proposition 65 Warning:

    This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

    Instructions

    1. Put a small amount of Honing Solution on your stone. Don't use a lot of lubricant as a small amount goes a long way. Using a Natural Stone without a lubricant or water will damage and clog your stone. It protects the stone and the cutting edge of the knife or tool by washing away the particle of stone and metal created during the sharpening process. If necessary, water can be used as a substitute.
    2. To insure the proper sharpening angle on your knife, place the yellow Smith's Angle Guide at the end of your stone. This shows you the proper angle we recommend to use in order to obtain the sharpest edge. Next, place your blade flat on the Angle Guide at the end of the stone. Now you are ready to begin the sharpening process.
    3. Push the blade away from you just like you are trying to carve a thin slice off the top of the stone. Don't be afraid to use pressure against the stone while sharpening since it will not damage the stone or your knife. Repeat this pushing stroke 3 or 4 times. Remember, try to keep the same approximate sharpening angle all the time, since this is the key to obtaining the sharpest edge.
    4. To sharpen the other side of your knife, simply place your blade at the opposite end of your Smith sharpening stone and repeat the above steps, but instead of pushing the knife away from you, pull it towards you. Continue to sharpen until you feel that your blade is truly sharp.

    Care:

    Cleaning your stones will keep the pores free of stone and metal particles. After each use, the Arkansas stones should be cleaned by scrubbing vigorously with water, liquid soap, and a stiff nylon brush.